
BlackBox TM100 4G AIS 140 GPS
Upgrade your fleet management capabilities with the BlackBox TM100 4G Advanced AIS140 IRNSS Certified GPS tracker designed for comprehensive vehicle monitoring and safety.
With Two Unique Features:
Accident Call Alerts
- In case of an unfortunate event, the TM100 ensures swift response.
- Automatically triggers accident call alerts to registered mobile numbers.
- Provides real-time information on the vehicle’s location during emergencies.
- A life-saving feature ensuring prompt action during critical situations.
Driving Behavior Monitoring
- Gain insights into driver behavior for enhanced safety and efficiency.
- Monitor speed, acceleration, braking, and turning patterns in real-time.
- Identify and address unsafe driving practices to reduce wear and tear.
- Promotes responsible driving, leading to lower operational costs and increased safety.
Features of TM 100 4G AIS 140 GPS

- Driver’s Behavior
- 4G Network
- Fuel Monitoring
- Box Tempering Alert
- Temperature Monitoring
- Vehicle Immobilization
- AC On/Off
- Ignition On/Off
- Engine On/Off
- Crash Detection
- RFID Interface
- RS232/485 Interface
- 4 Digital Inputs
- IP65
- CAN Data Reading from vehicle and specialized Transport
GSM Specifications | |
GSM | M66- Quectel Quad-band 850/900/1800/1900MHz Module |
GPRS | Multi-slot Class 12, Speed 86Kbps |
Protocols | TCP/IP |
SIM | E-SIM / Nano SIM Card Optional |
SMS | Text SMS OTA Command Support |
FOTA | FOTA FTP support |
GPS Specifications | |
GPS | L86 Quectel GPS L1 Band (1575.42MHz ) GLONASS L1 Band ( 1601.71MHz ) SBAS : WAAS, EGNOS MSAS,GAGAN |
GPS Channels | 33 (Tracking) / 99 (Acquisition) |
Horizontal Position Accuracy | <2.5 m CEP |
Velocity Accuracy | <0.1m/s |
Acceleration Accuracy | 0.1 m/s² |
Cold Start Warm Start Hot Start | <35s <30s <1s |
Sensitivity Acquisition Tracking Reacquisition | -148dBm -165dBm -160dBm |
Micro Controller and IO’s Specifications | |
Micro-controller | Nuvoton NUC131 32 bit ARM Cortex™-M0 Processor With 50MHzPLL Clock, 32KB SRAM, 64KB Code Memory |
Flash Memory | 64 M-Bit for Data logging up to 50000 data packs |
Accelerometer / Gyro Meter | Yes 16G Sensitivity |
Digital Inputs | One dedicated to Ignition Input Four other Active High Digital inputs One Rising edge detector with active low input for Emergency button |
Analog Inputs | One Frequency Input for RPM reading / Optional with digital input 4 Four 12bit ADC channels read up to 28000 mV |
Digital Output | Two Digital output active low up to 500mA |
UART RS232 Port | One UART RS232 Port with configurable baud rate Use to read digital RS232 fuel Sensor data. It can be customize as per requirement as well |
Tamper Switch | Yes To detect device cover open/close |
Hardware Reset Switch | Yes |
Device Power Specification | |
Input Power Voltage | 8Volt to 36 Volt |
Current Drawn by device | Max – 350mA @ 12Volt during Charging Nominal – 80mA @ 12Volt when internal battery is full |
Li-ion Battery | 1100mAH backup up to 6 hours |
LED’s | RED – Blinking When working on external voltage Yellow – GPS Signals Reception Blue – Blinking when device is active Green – Blinks in every 3 sec Normal working Twice blink device is sensing vibrations Fast Blinking when sending data to SERVER |
Housing Specifications | |
Housing Type | ABS Plastic optional Polycarbonate IP68 Certified |
dimensions | Length : 100 mm Breath : 80 mm Height : 35 mm |