BlackBox TM33+
Description
Technical Specifications
Features
Description
BlackBox TM33+ GPS Vehicle Tracker is one of the most sophisticated GPS Trackers in India backed with robust technology and hardware that provides precise, accurate, and real-time monitoring. The device allows you to keep track of your fleet’s location, fuel usage, engine temperature monitoring, and other important factors that affect the operational efficiency of the vehicle.
By installing the tracker in your vehicle, you will receive regular updates on your data-connected smartphone. Other features include vehicle maintenance notifications, speed alerts, and a regularly updated track of your vehicle’s location.
Technical Specifications
| GSM Specifications | |
| GSM | M66- Quectel Quad-band 850/900/1800/1900MHz Module |
| GPRS | Multi-slot Class 12, Speed 86Kbps |
| Protocols | TCP/IP |
| SIM | E-SIM / Neon SIM Card Optional |
| SMS | Text SMS OTA Command Support |
| FOTA | FOTA FTP support |
| GPS Specifications | |
| GPS | L86 Quectel GPS L1 Band (1575.42MHz ) GLONASS L1 Band ( 1601.71MHz ) SBAS : WAAS, EGNOS MSAS,GAGAN |
| GPS Channels | 33 (Tracking) / 99 (Acquisition) |
| Horizontal Position Accuracy | <2.5 m CEP |
| Velocity Accuracy | <0.1m/s |
| Acceleration Accuracy | 0.1 m/s² |
| Cold Start Warm Start Hot Start | <35s <30s <1s |
| Sensitivity Acquisition Tracking Reacquisition | -148dBm -165dBm -160dBm |
| Micro Controller and IO’s Specifications | |
| Micro-controller | Nuvoton NUC131 32 bit ARM Cortex™-M0 Processor With 50MHzPLL Clock, 32KB SRAM, 64KB Code Memory |
| Flash Memory | 64 M-Bit for Data logging up to 50000 data packs |
| Accelerometer / Gyro Meter | Yes 16G Sensitivity |
| Digital Inputs | One dedicated to Ignition Input Four other Active High Digital inputs One Rising edge detector with active low input for Emergency button |
| Analog Inputs | One Frequency Input for RPM reading / Optional with digital input 4 Four 12bit ADC channels read up to 28000 mV |
| Digital Output | Two Digital output active low up to 500mA |
| UART RS232 Port | One UART RS232 Port with configurable baud rate Use to read digital RS232 fuel Sensor data. It can be customize as per requirement as well |
| Tamper Switch | Yes To detect device cover open/close |
| Hardware Reset Switch | Yes |
| Device Power Specification | |
| Input Power Voltage | 8Volt to 36 Volt |
| Current Drawn by device | Max – 350mA @ 12Volt during Charging Nominal – 80mA @ 12Volt when internal battery is full |
| Li-ion Battery | 1100mAH backup up to 6 hours |
| LED’s | RED – Blinking When working on external voltage Yellow – GPS Signals Reception Blue – Blinking when device is active Green – Blinks in every 3 sec Normal working Twice blink device is sensing vibrations Fast Blinking when sending data to SERVER |
| Housing Specifications | |
| Housing Type | ABS Plastic optional Polycarbonate IP68 Certified |
| dimensions | Length : 100 mm Breadth : 80 mm Height : 35 mm |
Features
- IP65
- Driver’s Behavior
- Fuel Monitoring
- Box Tempering Alert
- Temperature Monitoring
- Vehicle Immobilization
- AC On/Off
- Ignition On/Off
- Engine On/Off
- Crash Detection
- RFID Interface
- RS232 Interface
- 4 Digital Inputs
